CY8CKIT-040 PSoC
®
4000 Pioneer Kit Guide, Doc. # 001-91316 Rev. *F
149
Advanced Topics
5. When ready, select the
Program
button (or
File > Program
) to program the PSoC 5LP device,
as shown in
6. After programming is complete, the message "Program Finished at <time>” appears.
Figure 6-61. Program Finished
7. The factory program is now successfully restored on the PSoC 5LP. You can use it as the pro-
grammer/debugger for the PSoC 4 device.
6.6
Using µC/Probe Tool
Micrium’s µC/Probe is a Windows application that allows you to read and write the memory of any
embedded target processor during runtime, and map those values to a set of virtual controls and
indicators placed on a graphical dashboard.
This tool helps in designing a simple GUI for development kit example projects with least effort. Note
that the Micrium µC/Probe tool is not a prerequisite software required to run this kit and is not
installed along with the kit contents.
The license required to use all the features of the tool need to be purchased separately. However,
the educational edition of the tool is available as a free download from
http://micrium.com/download/ucprobe-3-0-trial-version/
.
For more details on licensing and the µC/Probe tool, refer to the µC/Probe Users’ Manual at
http://micrium.com/download/%c2%b5cprobe-3-0-users-manual/
In Micrium µC/Probe version 3.3, the Cypress KitProg is supported as a means of communication to
the target device connected to the computer. When an example project is built in PSoC Creator, it
produces the output files in HEX, LST, MAP, RPT, and ELF formats.
Содержание CY8CKIT-040 PSoC 4000 Pioneer Kit
Страница 20: ...CY8CKIT 040 PSoC 4000 Pioneer Kit Guide Doc 001 91316 Rev F 20 Kit Operation...
Страница 37: ...CY8CKIT 040 PSoC 4000 Pioneer Kit Guide Doc 001 91316 Rev F 37 Hardware...
Страница 73: ...CY8CKIT 040 PSoC 4000 Pioneer Kit Guide Doc 001 91316 Rev F 73 Code Examples Raw count and Baseline...
