Cypress CY8CKIT-040 PSoC 4000 Pioneer Kit, Руководство пользователя

Страница: 127 / 181

CY8CKIT-040 PSoC
®
4000 Pioneer Kit Guide, Doc. # 001-91316 Rev. *F 127
Advanced Topics
5. In HyperTerminal, select Bits per second , Data bits , Parity , Stop bits , and Flow control under
Port Settings and click OK , as shown in Figure 6-34 . Make sure that the settings are identical to
the UART settings configured for PSoC 4.
In PuTTY, select
Speed (baud) , Data bits , Stop bits , Parity , and Flow control under Configure
the serial line shown in Figure 6-33 (second image). Click Session and select Serial under
Connection type , as shown in Figure 6-35 . Serial line shows the communication port (COM12),
and Speed shows the baud rate selected. Click Open to start the communication.
Figure 6-34. Configure Communication Port in HyperTerminal