3.
Place the motor cover into position vertically by aligning the two tabs and four plastic connectors.
Two plastic connectors are mounted in the front cover and two in the motor cover.
Qty.
Description
1
Motor cover
1
2
Tabs
2
1
Plastic connectors
3
If motor cover top does not fit properly, loosen the side screws on the front cover as needed.
4.
Using a Phillips screwdriver, finish tightening the four front cover screws. Be sure the screws are
securing the motor cover's tabs.
Install power cord
Shock and electrocution hazard.
• Route power cord so it does not become damaged.
• Do not allow cord to be pinched or interfere with movement of treadmill.
1.
Plug the power cord into the base of the unit.
Qty.
Description
1
Power cord
1
1
Bracket
2
1
Screw
3
2.
Secure the power cord with the mounting bracket and mounting screw using a Phillips screwdriver.
Level treadmill
Confirm that the treadmill is on a level surface.
Page 28 of 105
Cybex Treadmill Product Number 770T Part Number LT-22983-4 M