9.
Secure the power cord with two wire ties.
Qty.
Description
1
Power cord
1
2
Wire tie
2
Setup
Use the following instructions to setup the unit.
Falling hazard. When starting unit
• Stand on two top steps.
• Do not stand on belt.
Cybex recommends that the treadmill be unplugged or the on/off (I/O) power switch turned off (O) when
it is not in use.
1.
Without anyone on the treadmill, plug the power cord into a power outlet from a grounded, dedicated
circuit.
Ensure the power cord is not being pinched under the front of the treadmill.
2.
Toggle the on/off (I/O) power switch to the on (I) position. The on/off (I/O) power switch is located
under the front end of the unit, or on the front right side panel.
3.
The control panel will light up.
Initial setup
Initial setup only occurs during the installation of the unit. Once complete, refer to Setup Options below.
Press and hold Cybex logo for 6 seconds to access
Screen
Lock
and
Toolbox
.
CYBEX
LOGO
Press and hold language logo for 6 seconds to access
Screen
Lock
and
Toolbox
.
LANGUAGE
ICON
1.
Tap the
Access Toolbox
icon to display the
Access to Toolbox
login screen.
2.
Enter the sequence:
.
3.
Tap the
Setup
icon to display the
setup menu
.
4.
Tap the
Time
icon to advance to the
Set the Time
screen.
5.
Adjust the time if needed, then tap the
ENTER
icon
.
Page 31 of 105
Cybex Treadmill Product Number 770T Part Number LT-22983-4 M