CyberPower PDU31 Series Скачать руководство пользователя

Страница: 113 / 124

111

Intelligent PDU User Guide

PDU Network Daisy Chain

What will happen if an Ethernet cable is disconnected in the PDU daisy-chain?

For example, if four PDUs are connected and the cable connecting Guest 1 and 2 is disconnected,

then Guest 2 and 3 will no longer be detected by the Host PDU.

An event showing that Guest 2 and 3 are removed will be recorded in the Host PDU. Meanwhile,

Guest 2 and 3 will create a new daisy-chain where Guest 2 becomes a Host and Guest 3 becomes

Guest 1 to the new Host.

In the above example, if the disconnected Ethernet cable is re-connected, will the role of the PDUs
stay the same?

Yes, when the disconnected cable between Guest 1 and 2 is re-connected, Guest 2 and 3 will revert to

their previous roles.

What happens if one PDU in the daisy-chain is powered off?

For example, if four PDUs are connected and Guest 1 is powered off, an event

showing that Guest 1, 2 and 3 are removed will be recorded in the Host PDU. Guest 2 and 3 will not

create another daisy-chain.

Does the Host PDU record the logs of the Guest PDUs and itself?

Yes, the Host PDU records the logs from all Guest PDUs daisy-chained to it.

Will the Logs of the Guest PDUs recorded in the Host PDU be cleared if the Guest PDUs are
removed from the Host PDU?

No, the Logs of the Guest PDUs will remain even after the Guest PDUs are removed.

Does the Host PDU record the Status Records of the Guest PDUs and itself?

Yes, the Host PDU records the Status Records for all the PDUs in the daisy-chain.

Содержание PDU31 Series




























































































































Результаты поиска

Содержание PDU31 Series

Отзывы:

Похожие инструкции для PDU31 Series

Бренды по названию

Популярные бренды

CyberPower PDU31 Series, Руководство пользователя

Результаты поиска

Содержание PDU31 Series

Отзывы:

Похожие инструкции для PDU31 Series

Бренды по названию

Популярные бренды