CyberPower PDU31 Series, Руководство пользователя

Страница: 97 / 124

95
Intelligent PDU User Guide
Commad Line Interface
pri
sec
show
Display primary/secondary Radius server
information.
add
Add radius server then input radius server
IP/Secret/Port appear later on.
add
<server IP> <server secret>
<server port>
Add radius server information including
server IP/Secret/Port at one time.
priip
secip
<radius server IP>
Set the IP address of primary/secondary
RADIUS server.
priport
secport
<radius server port>
Set the UDP port which is used by the
primary/secondary Radius server.
prisecret
secsecret
<radius server secret>
Set the shared secret of primary/secondary
Radius server.
pridel
secdel
Delete primary/secondary Radius server
Example 1:
To view primary radius server information
CyberPower > radius pri show
Server IP: 192.168.26.33
Server Secret: testsecret
Server Port: 1826
Example 2:
To view secondary radius server information
CyberPower > radius sec show
Server IP: 192.168.30.58
Server Secret: testsecret2
Server Port: 1508
Enter the following command to add Radius server information configuration with a single command:
radius add <Server IP> <Share Secret> <Server Port>
For example:
CyberPower > radius add 192.168.203.55 testsecret 150
Note:
This single command could not be executed successfully if there are two Radius servers to be
set already.
ldap
Description: Show and configure information of LDAP server.