CyberData 011233, Руководство по эксплуатации

Страница: 70 / 98

Installing the InformaCast Enabled Paging Adapter
Restore the Factory Default Settings
Operations Guide 931767B CyberData Corporation
63
2. On the Autoprovisioning page, you may enter values for the parameters indicated in Table 2-
14 .
Note The question mark icon (
) in the following table shows which web page items will be defined
after the Toggle Help button is pressed
.
Table 2-14. Autoprovisioning Configuration Parameters
Web Page Item Description
Disable Autoprovisioning Prevent the device from automatically trying to download a configuration file. See
Section 2.5.12.1, "Autoprovisioning" for more information.
Autoprovisioning Server Enter the address of the provisioning server as a fqdn or IPv4 address in dotted
decimal notation.
Autoprovisioning Filename The name of the configuration file. The default autoprovisioning filename is in the
format of
<mac address>.xml .
Supported filename extensions are “.txt”, and “.xml.” The current filename is
denoted by an asterisk at the bottom of the
Autoprovisioning Page . Enter up to
256 characters.
A file may have any name with an xml extension. If a file name is entered, the
device will look for the specified file name, and only that file.
Use tftp The device will use TFTP (instead of http) to download autoprovisioning files.
Username The username used to authenticate with an autoprovisioning server. Leave this
field blank to disable authentication.
Password The password used to authenticate with an autoprovisioning server. Leave this field
blank to disable authentication.
Autoprovisioning autoupdate

(in minutes)
The reoccurring time (in minutes) the device will wait before checking for new
autoprovisioning files. Enter up to 6 digits. A value of 0 will disable this option.
Note : To use the auto update options, enable the Enable NTP setting on the
Device Page page (see Table 2-6 ).
Autoprovision at time (HHMMSS) The time of day the device will check for a new autoprovisioning file. The time must
be 6 characters in length and in HHMMSS format. An empty value will disable this
option.
Note : To use the auto update options, enable the Enable NTP setting on the
Device Page page (see Table 2-6 ).
Autoprovision when idle

(in minutes > 10)
The idle time (in minutes greater than 10) after which the device will check for a
new autoprovisioning file. Enter up to 6 digits. A value of 0 will disable this option.
Note : To use the auto update options, enable the Enable NTP setting on the
Device Page page (see Table 2-6 ).
Click the Save button to save your configuration settings.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the web
page items. First click on the Toggle Help button, and you will see a question mark
( ) appear next to some of the web page items. Move the mouse pointer to hover
over a question mark to see a short description of a specific web page item.