Installing the InformaCast Enabled Paging Adapter
Restore the Factory Default Settings
Operations Guide
931767B
CyberData Corporation
31
Nightringer Settings
Enable Nightringer
When Nightringer is enabled, the device will attempt to register a second extension
with the SIP server. Any calls made to this extension will play a ringtone
(corresponds to
Night Ring
on the
Audiofiles
page). By design, it is not possible to
answer a call to the Nightringer extension.
SIP Server
Enter the SIP server address as an IPv4 address in dotted decimal notation or a fully
qualified domain name. This parameter also becomes the host portion of the SIP-
URI for the device's Nightringer extension on the SIP server. This field can accept
entries of up to 255 characters in length.
Remote SIP Port
The Remote SIP Port is the port number the device will use as the destination port
when sending SIP messages for the Nightringer extension. The default Remote SIP
Port is 5060. The supported range is 0-65536. Enter up to 5 digits.
Local SIP Port
The Local SIP Port is the port number the device will use to receive SIP messages
for the Nightringer extension. This value cannot be the same as the
for the primary extension. The default Local SIP Port is 5061. The supported range is
0-65536. Enter up to 5 digits.
Outbound Proxy
Enter the Outbound Proxy address as an IPv4 address in dotted decimal notation or
a fully qualified domain name (FQDN). When an IP address is configured, the device
will send all SIP messages to this IP address for the Nightringer extension. When an
FQDN is configured, the device will run DNS NAPTR, SRV, and A queries on the
FQDN to resolve an IP address to which it will send all SIP messages for the
Nightringer extension. This field can accept entries of up to 255 characters in length.
Outbound Proxy Port
The Outbound Proxy Port is port number used as the destination port when sending
SIP messages to the outbound proxy for the Nightringer extension. A value of 0 will
default to 5060. The supported range is 0-65536. Enter up to 5 digits.
User ID
Specify the SIP User ID for the SIP server. This parameter becomes the user portion
of the SIP-URI for the device's Nightringer extension. Enter up to 64 alphanumeric
characters.
Authenticate ID
Specify the Authenticate ID for the SIP Server. This parameter is required for SIP
registration authentication. Enter up to 64 alphanumeric characters.
Authenticate Password
Specify the Authenticate Password for the SIP Server. This parameter is required for
SIP registration authentication. Enter up to 64 alphanumeric characters.
Re-registration Interval (in seconds)
The SIP Re-registration Interval (in seconds) is the SIP Registration lease time, also
known as the expiry. The supported range is 30-3600 seconds. Enter up to 4 digits.
Call Disconnection
Terminate Call After Delay
Automatically terminate an active call after a given delay in seconds. A value of 0 will
disable this function. Enter up to 8 digits.
Codec Selection
Force Selected Codec
When configured, this option will allow you to force the device to negotiate for the
selected codec [PCMU(G.711, u-law), PCMA(G.711, a-law), G.722, or G.729.
Otherwise, the device will perform codec negotiation using the default list of
supported codecs.
Codec
Select desired codec (only one may be chosen).
Table 2-8. SIP Configuration Parameters (continued)
Web Page Item
Description
