Installing the InformaCast Enabled Paging Adapter
Restore the Factory Default Settings
Operations Guide
931767B
CyberData Corporation
18
2.5.3 Log in to the Configuration GUI
1. Open your browser to the InformaCast Enabled Paging Adapter IP address.
Note
If the network does not have access to a DHCP server, the device will default to an IP
address of 10.10.10.10.
Note
Make sure that the PC is on the same IP network as the InformaCast Enabled Paging
Adapter.
Note
You may also download CyberData’s VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products.
CyberData’s VoIP Discovery Utility program is available at the following website address:
https://www.cyberdata.net/pages/discovery
The unit ships in DHCP mode. To get to the
Home
page, use the discovery utility to scan for
the device on the network and open your browser from there.
Note
To work with the InformaCast Enabled Paging Adapter configuration
after
the initial
configuration, log in using the IP address you assign to the device.
provides instructions for entering the IP address.
2. When prompted, use the following default
Username
and
Password
to open the configuration
Home page:
Username:
admin
Password:
admin
Change the
Default Username
and Password
To change the default Web access Username and Password:
1. Enter the new Username from four to 25 alphanumeric characters in the
Change Username
field. The Username is case-sensitive.
2. Enter the new Password from four to 25 alphanumeric characters in the
Change Password
field. The Password is case-sensitive.
3. Enter the new password again in the
Re-enter New Password
field.
Click
Save Settings
.
