Installing the InformaCast Enabled Paging Adapter
Connecting the InformaCast Enabled Paging Adapter
Operations Guide
931767B
CyberData Corporation
12
2.3.8 Confirm that the InformaCast Enabled Paging Adapter is Up and
Running
The LEDs on the front of the InformaCast Enabled Paging Adapter verify the unit’s operations.
Figure 2-6. LEDs
2.3.8.1 Verify Network Activity
The square,
GREEN
Activity
LED blinks when there is network traffic.
When you plug in the Ethernet cable or power supply:
•
The
GREEN
/
BLUE
Status
LED and the
GREEN
Paging
LED both blink at a rate of 10 times per
second during the initial network setup.
•
The round,
GREEN
/
BLUE
Status
LED on the
front of the InformaCast Enabled Paging Adapter
comes on indicating that the power is on. Once
the device has been initialized, this LED blinks at
one second intervals.
•
The square,
YELLOW
Link
LED above the
Ethernet port indicates that the network
connection has been established at 100Mbit
speed.
•
The
GREEN
Paging
LED comes on after the
device is booted and initialized. This LED blinks
when a page is in progress. You can disable
Beep on Initialization
on the
Device
Configuration
page.
Status
(
GREEN
/
BLUE
LED)
Paging
(
GREEN
LED)
Link
(
YELLOW
LED)
Activity
(
GREEN
LED)
