CyberData 011233, Руководство по эксплуатации

Страница: 54 / 98

Installing the InformaCast Enabled Paging Adapter
Restore the Factory Default Settings
Operations Guide 931767B CyberData Corporation
47
2. On the Fault Detection page, enter values for the parameters indicated

in Table 2-11 .
Note The question mark icon (
) in the following table shows which web page items will be defined
after the Toggle Help button is pressed
.
Note You must click on the Save button for the changes to take effect.
Table 2-11. Fault Detection Configuration Parameters
Web Page Item Description
Triggered Settings
Play Stored Audio Locally When selected, the device will play the user defined “sensor
triggered” audio file when the fault detection is triggered.
Make Call to Extension When selected, the device will call an extension when fault
detection is triggered. Use the
Dial Out Extension field to specify
the extension the device will call.
Dial Out Extension Specify the extension the device will call when fault detection is
triggered. Enter up to 64 alphanumeric characters.
Dial Out ID An additional Caller identification string added to outbound calls.
Enter up to 64 alphanumeric characters.
Repeat Message The number of times to repeat the audio message through the
local speaker or to the remote endpoint. A value of 0 will repeat
forever. Enter a value from 0-65536.
Click on the Test Fault Detection button to test the fault detection
feature.
Click the Save button to save your configuration settings.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some
of the web page items. First click on the Toggle Help button, and
you will see a question mark ( ) appear next to some of the web
page items. Move the mouse pointer to hover over a question
mark to see a short description of a specific web page item.