manualshive.com logo in svg

Culligan G1 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 7 / 142

Поделиться
Скачать
Culligan G1 Series Скачать руководство пользователя страница 7

G1 RO Features    

3

Cat. No. 01021713

Flush Options

The system offers six different membrane flush modes to improve performance and extend membrane life.

NOTE  Quality Flush and Permeate Flush are mutually exclusive optional features.

Target TDS

The RO system keeps track of the average product water TDS whenever the RO system is operating, mixing lower quality 

water with product water to meet the average product water TDS. 

Communications via Modem

An optional modem and monitoring service can be used to remotely monitor the RO performance over time. This service 

can also be used to alert the customer and the Culligan dealer in the event that an alarm or error condition occurs.

Wireless Remote Communication

An optional wireless remote can display the current operational status and performance statistics up to 200 feet from the 

G1 RO system.

PLC Outputs Available

The GBE Controller collects data once per minute and then streams the data to a customer-owned PLC for data collection 

or monitoring. Customer would have to write code to take text information and convert the data for their data collection 

system. For more information, see Culligan P/N 01021512 Advanced Communication Manual.
This data, once converted from a text stream, can easily be imported to an excel spreadsheet and the data logged can 

then be graphed and trended.

Содержание G1 Series















































































































































Отзывы:

Нет отзывов