45
Gateway(config-
data/management -1)# no static-
ip
Return Static IP connection to default
setting
Gateway(config-
data/management -1)# no vlan-
id
Return VLAN ID to default setting.
Show command
Gateway(config-
data/management -1)# show
Show current WAN DATA interface status.
2.5.7 Management Command
Command
Parameter
Description
Gateway(config)#
management access-
control lan
Permit the computers to manage the
Residential Gateway from its LAN ports.
Gateway(config)#
management access-
control lan telnet
Gain the Telnet management access on
LAN port.
Gateway(config)#
management access-
control lan web
Gain the Web management access on
LAN port.
Gateway(config)#
management access-
control lan snmp
Gain the SNMP management access on
LAN port.
Gateway(config)#
management access-
control source-binding
[A.B.C.D] [1-254]
[A.B.C.D] [1-254] Specify a range of IP addresses to enable
these IP addresses to manage the
Residential Gateway from the WAN port
Gateway(config)#
management access-
control source-binding any
The Residential Gateway can be managed
from its WAN port by any remote IP
address.
Gateway(config)#
management access-
control wan
Permit the computers to manage the
Residential Gateway from its WAN ports.
Gateway(config)#
management access-
control wan snmp
Gain the SNMP management access on
WAN port.
Gateway(config)#
management access-
control wan telnet
Gain the Telnet management access on
WAN port.
Gateway(config)#
management access-
control wan web
Gain the Web management access on
WAN port.
Gateway(config)#
management dhcp-
autoprovision
Enable DHCP auto-provision function.
Gateway(config)#
management web http-port
[HTTP_Port]
[HTTP_Port]
Specify the Internet socket port number
used by protocols of the transport layer of
the Internet Protocol Suite for the
establishment of host-to-host connectivity.