![CTS VRG5-31412 Series Скачать руководство пользователя страница 32](http://html1.mh-extra.com/html/cts/vrg5-31412-series/vrg5-31412-series_user-manual_2694013032.webp)
32
password [password]
Gateway(config-wlan1-ssid-
No.)# dot1x radius-server-
port [1812-65535]
[1812-65535]
Specify the port number for the RADIUS
server. The default value is 1812.
Gateway(config-wlan1-ssid-
No.)# operation-mode
[nat|bridge]
[nat|bridge]
Specify the operation mode for the service set,
either NAT or Bridge mode.
Gateway(config-wlan1-ssid-
No.)# restrict rx [0-1000]
[0-1000]
Specify the limit in Mbps for data reception.
Gateway(config-wlan1-ssid-
No.)# restrict tx [0-1000]
[0-1000]
Specify the limit in Mbps for data transmission.
Gateway(config-wlan1-ssid-
No.)# security encryption
action [disable|wep|wpa-
mixed|wpa2]
[disable|wep|wpa-
mixed|wpa2]
Specify the encryption method.
WEP stands for
“Wired Equivalent Privacy”. It
is a basic encryption method based on IEEE
802.11 standard.
WPA
stands for
“Wi-Fi Protected Access”. It is
a kind of encryption which improves the
security of WEP. It adopts two security-
enhanced types to encrypt data
-
TKIP
(Temporal Key Integrity Protocol) and
AES
(Advanced Encryption Standard).
AES
is a
stronger encryption method than
TKIP
.
WPA2
is based on 802.11i. And it provides a stronger
wireless security than
WPA
.
WPA Mixed
is the security mode which permits
the coexistence of WPA and WPA2 clients on a
WLAN. When the wireless security is set in this
mode, the wireless client device can connect to
the Residential Gateway with WPA/TKIP or
WPA2/AES. Some older wireless client devices
only support WPA/TKIP. So you have to select
the mixed mode to open the WiFi service to
this device.
Gateway(config-wlan1-ssid-
No.)# security encryption
wep authentication [open-
system|shared-key|auto]
[open-
system|shared-
key|auto]
The three available authentication options are
Open System
,
Shared Key
and
Auto
. If you
select
Open System
, anyone can request
authorization and sends an ID to the
Residential Gateway. If the Residential
Gateway recognizes the ID, wireless client can
connect to the Residential Gateway
.
Shared
Key
requires wireless clients to have the same
key positions as the Residential Gateway.
Gateway(config-wlan1-ssid-
No.)# security encryption
wep key [key]
[key]
Specify the alphanumeric password for the
WLAN.