18
configuration error. It can be used in Privileged or Configuration mode. The following describes
different uses of
“show” command.
1. Display system information
Enter
“show system-info” command in Privileged or Configuration mode, and then the following
information will appear.
Company Name:
Display a company name for this Gateway. Use
“system-info company-name
[company-name]
” command to edit this field.
System Object ID:
Display the predefined System OID.
System Contact:
Display contact information for this Gateway. Use
“system-info system-contact
[sys-contact]
” command to edit this field.
System Name:
Display a descriptive system name for this Gateway. Use
“system-info system-
name [sys-name]
” command to edit this field.
System Location:
Display a brief location description for this Gateway. Use
“system-info system-
location [sys-location]
” command to edit this field.
Model Name:
Display the product
’s model name.
Host Name:
Display the product
’s host name.
DHCP Vendor ID:
Enter the Vendor ID used for DHCP relay agent function.
Firmware Version:
Display the firmware version used in this device.
Current Boot Image:
The image that is currently using.
Configured Boot Image:
The image you want to use after reboot.
Image-1 Version:
Display the firmware version 1 (image-1) used in this device.
Image-2 Version:
Display the firmware version 2 (image-2) used in this device.
M/B Version:
Display the main board version.
Serial Number:
Display the serial number of this Gateway.
Up Time:
Display the up time since last restarting.
Local Time:
Display local time.
2. Display or verify currently-configured settings
Refer to the following sub-sections.
“Interface command”, “IP command”, “User command”, “VLAN
command
” sections, etc.
3. Display interface information or statistics
