CTC Union FTH4-1000MS, Руководство пользователя

Страница: 7 / 47

7
1.3 Product Features

Auto-Cross over for MDI/MDIX at UTP port

Auto-Negotiation or Forced Manual mode for UTP port

Supports SFP for selectable Fast or Gigabit speed on fiber (for FTH4-1000MS only)

Supports 802.3X flow control Enable or Disable

Supports Jumbo Frames up to 9600 bytes

Supports 16 Tag VLAN Groups

Supports 802.1Q tagging

Ingress/Egress Bandwidth control with 64K granularity

Supports 802.3ah-OAM loop back and dying gasp (remote power failure detection)

Supports firmware upgrade via Web

Supports Digital Diagnostics (DOM) for supported SFP

Includes RMON counters

Supports password setting for authentication

Supports Link Fault Pass Through (LFP) Function

Supports Auto Laser Shutdown (ALS) Function

With built-in fiber cable tray
FTH4-1000MS SFP socket supports a wide range of standard SFP modules to address any network situation.
WARNING: Fiber optic equipment may emit laser or infrared light that can injure your eyes. Never look into an optical fiber or connector port.
Always assume that fiber optic cables are connected to an active laser light source.