CTC Union FTH4-1000MS Скачать руководство пользователя | Manualshive

Страница: 6 / 47

background image

6

Chapter 1 Introduction

1.1 Welcome

Thank you for choosing

FTH4-1000MS & FTH4-100M

Managed Gigabit & Fast Ethernet OAM/IP Media Converter with cable tray.

Throughout this document, the two different models of this family will be referred to as

FTH4-1000M & FTH4-100M

(FTH4-1000MS will also be

stated when necessary). If you would like to skip right to the installation of the media converter, proceed to Chapter 2.

This manual is used to explain the hardware installation procedures and operation of

FTH4-1000M & FTH4-100M

, and present its

capabilities and specifications. This manual is divided into 3 chapters, the Introduction, Installation, and Provisioning Chapters.

Installers should carefully read the Chapters 1 & 2, Introduction and Installation. The divisions in that manual are intended for use by

personnel to answer questions in general areas. Planners and potential purchasers may read the Introduction to determine the suitability of the
product to its intended use; Operating Personnel would use the Web Based Management Chapters and Appendices to become familiar with
the settings. Network Administrators should read the chapters on Web Based Management and Trouble Shooting to become familiar with the
diagnostic capabilities, network settings and management strategies.

1.2 Product Description

FTH4-1000M & FTH4-100M

are managed electrical to optical media converters with cable tray for Gigabit & Fast Ethernet. There are two

models  for  FTH4-1000MS  series,  one  with  fixed  optical  transceiver  (FTH4-1000M)  and  one  supporting  pluggable  SFP  transceiver  (FTH4-
1000MS).  These  converters  support  embedded  stand-alone  Web  based  management  over  IP  networks  as  well  as  IEEE802.3ah  OAM  for
remote in-band management.

FTH4-1000M & FTH4-100M

are IEEE802.3ah OAM compliant copper to fiber Gigabit & Fast Ethernet solution housed in wall mountable

enclosure. These converters have a built-in cable tray that allows users to enclose excessive fiber within the converter. When deployed as a
stand-alone solution, this media converter incorporates an easy to use Web user interface for operation, administration and maintenance of
both locally and remotely connected

FTH4-1000M & FTH4-100M

converters. By offering 802.3ah OAM compliance, this converter can be

linked to any 802.3ah compliant fiber switch and support loop back and dying gasp functions.

«
...
4
5
6
7
8
...
»

Содержание FTH4-1000MS
















































Отзывы:

Нет отзывов

Похожие инструкции для FTH4-1000MS

VLT DeviceNet MCA 104

Бренд: Danfoss Страницы: 18

Бренд: Danfoss Страницы: 138

Бренд: Danfoss Страницы: 108

Бренд: Danfoss Страницы: 149

Бренд: V-TAC Страницы: 4

Бренд: M-Audio Страницы: 45

Бренд: matson Страницы: 11

Бренд: T+A Страницы: 74

Бренд: 3onedata Страницы: 3

Бренд: NANOTEC Страницы: 22

Бренд: Seneca Страницы: 4

Бренд: Parallax Страницы: 3

PowerSourcePro REINVMA10

Бренд: ring Страницы: 122

Бренд: Duracraft Страницы: 62

Бренд: Nagra Страницы: 18

Бренд: SOUNDMASTER Страницы: 16

Бренд: Bang & Olufsen Страницы: 14

Бренд: Hopewind Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды