CRU
R T X 4 1 0 / 6 1 0 / 8 0 1 - I R U s e r M a n u a l A 9 - 4 6 8 - 0 0 0 5 R E V 1 . 0
- 17 -
been following the instructions for manually creating a usable RAID set, you have now completed
setup and can now access the RAID set through iSCSI initiator software (see Section 8 for
installation and connection instructions).
7.4 Quick Installation
CRU-DataPort does not recommend using the Quick Installation option to set up your RTX. For quickly
setting up a RAID, refer to Section 7.7.1.
Quick Install uses all physical disks in RTX and the maximum amount of space they contain to create a
RAID Group using one Virtual Disk. There will be no space set aside for spares. If some disks are used in
other RAID Groups, Quick Install cannot be run.
7.5 System Configuration
The System Configuration menu gives access to a number of options used to configure RTX system
properties. Click on “System Configuration” to access the following menu options: System Settings, IP
Address, Login Settings, Mail Settings, and Notification Settings.
7.5.1 System Settings
System Settings allows you to view and change the system name, change the date and time, and turn the
System Indication LED on or off.
