INSTALLATION INSTRUCTIONS CM296A
© Panduit Corp. 2004
For Technical Support: www.panduit.com/resources/install_maintain.asp
Industrial Automation Enclosure
Part Number: IAEIP66, IAEFK54
Page 1 of 5
(view shown with door removed)
List of Components:
(1) 24 VDC Power Supply
(3) T
AK
-T
YS
(6) Adhesive Backed Mounts
(6) P
AN
-T
YS
(1) Electrical Hole Seal
(1) Port ID Label
(3) 10 AWG Grounding Cables
(1) 12 AWG Grounding Cable
(1) 35mm DIN Rail
(1) #10-32 x 1/2" Pan Head Screw
(3) #10 Spring Lock Washer
(2) #10-32 Hex Nut
IAEIP66
35mm DIN Rail
Cover Plates for Fan
and Exhaust Filter
Openings
Opening for 1/2"
Conduit Fitting
Opening for Industrial
Enclosure Gland Plate
Inner Panel
Important Notice:
Should Fan Kit P/N IAEFK54 be integrated into the enclosure, P/N IAEIP66, the IP rating of the enclosure
shall be reduced to IP54. If the enclosure and any active equipment is located in an environment containing conductive
particles that have the potential to cause sparks and shorts, or the enclosure is placed in an environment that contains
ignitable dust or explosive gases, in this scenario the IP rating of the enclosure shall be reduced to IP44. Before any
application in these last cases, the installer should insure that all requirements, legal and industry, are met and
precautions are taken to meet the installation requirements of the equipment placed inside the enclosure.
