Page12
4. Installation
Note: Allow 2.5cm minimum clearance on all sides for proper ventilation.
Do not operate the UPS in an environment where the ambient temperature or
humidity is outside the limits given in the Specifications section of this manual.
4.3 Connect UPS to service and switch on
Plug the UPS into a working wall outlet which of two-pole, three wire grounding
receptacle using by factory supplied input power cords.
SwitchUPS is compatible with all 200, 220 and 230Vac mains voltages. The UPS
may be configured to operate where 220Vac service is provided. When Option
switch 1 is set to the
“
ON
”
position, the UPS
’
s transfer and on-battery output
voltages are adjusted for proper operation on 200Vac service. Also if Option
switch 2 is set to the
“
ON
”
position, the UPS
’
s transfer and on-battery output
voltages are adjusted for proper operation on 230Vac service.
4.3.1 Connect extension battery pack
–
PowerCell GUARD only (Optional parts)
No need any tool to connect extension battery pack. Just mate the battery
pack coupler to the electronics enclosure.
PowerCell GUARD can provide over 2 times longer run time than standard
model.
