Cronyx E1-XL/B-IP, Инструкция по установке и эксплуатации

Страница: 20 / 48

E1-XL/B-IP Multiplexor
© 2006 Cronyx
0
4.1.2. Ethernet Port Status
«Оk» – carrier available, connection is OK;
«no-link»
– no carrier or connection can’t be established;
4.1.3. TDM/IP-stream Local Status
«Ok»
– everything is all right;
«not-started» – connection to remote device was not established since stream
initiation;
«dirty» – unstable or near to critical stream state;
«lost» – connection to remote device lost;
«–dtx»
– DTX suffix means that local device switched over to “Discontinuous
Transmission” state, network packets are sent to remote device once in several
seconds;
4.1.4. Status of TDM/IP-stream Capture by Remote Device
«seize»
– remote device successfully seized and holds TDM/IP-stream;
«lost» – stream lost at remote device;
« ? » – no data available from remote device;
«–dtx»
– DTX suffix means that local device switched over to “Discontinuous
Transmission” state, network packets are sent from remote device to local device
once in several seconds;
•
•
•
•
•
•
•
•
•
•
•