Cronyx E1-XL/B-IP, Инструкция по установке и эксплуатации

Страница: 10 / 48

E1-XL/B-IP Multiplexor
© 2006 Cronyx
10
Ethernet Interfaces
Compliant with the following standards ........ IEEE 802.3, 802.3u, 802.1p, 802.1Q;
Bit rate ............................................................ 10 or 100 Mbits, half/full duplex, auto
negotiation;
Range ............................................................. Up to 100 m via UTP-5 cable;
Console port
Data transfer protocol .................................... Asynchronous, 9600-115200 baud, 8 bit/
symbol, 1 stop bit, non-parity;
Modem signals ............................................... DTR, DSR, CTS, RTS, CD;
Interface type, connector ................................
RS-232/V.24 DTE, DB-9 (male);
Diagnostic Modes
Loopbacks ...................................................... Local to E1 line, local to remote device;
Control ........................................................... Via console port or over SSH protocol;
Dimensions and Weight
Dimensions .................................................... 300 mm x 290 mm 70 mm;
Weight ............................................................ 3 kg;
Power Supply
AC input ......................................................... 100 - 240 V, 50 - 60 Hz;
Power consumption ........................................ not more than 250 W;
Environment Conditions
Temperature ................................................... 0 to +50 °С;
Relative humidity ........................................... To 80%, non-condensing;