Crestron
e-control Vote SW-VOTE
51
••
Server Configuration In Depth
Installation & Reference Guide — DOC. 5822
This option is also “sticky” like the
Timestamps
command.
•
Log | Find…
brings up the following modal window which helps locate a specific
signal.
Signal log search window.
Searches can be performed with and without case sensitivity by checking the
Match Case
option. When the window opens this option is unchecked —
meaning that the search algorithm disregards the upper- and lower-case status
of the characters in the search key.
Also when the window opens, the search direction is set to
Forward to end
meaning that the search will begin with the signal on the highlighted line and
will continue to the end of the log. The other options are
Forward from top
which searches the entire log;
Backward to top
which searches beginning with
the signal on the highlighted line and continuing back to the beginning of the
log; and
Forward to end then wrap around from top
which also searches the
entire log starting with the signal on the highlighted line.
