Crestron
e-control Vote SW-VOTE
118
••
Appendices
Installation & Reference Guide — DOC. 5822
StateEnd
Voting Console
Description
Voting concluded
Direction
Voting Computer to control system
Type
Digital
Value
Assert:
Voting concluded, console ready to display or print/save
(
End Vote
button feedback ON)
De-assert:
Results displayed or printed/saved
(
End Vote
button feedback OFF)
Expected Reply
To an assert:
Display, PrintSave,
or
Abort
To a de-assert:
None
Comments
Voting can be concluded either
§
by user interaction with the
Vote Proctor
window on the Voting Computer:
End Vote
button (only enabled while the floor is opened); or
§
when control system issues the
End
signal when the floor is opened.
End vote feedback goes dark when:
§
User interaction with the
Vote Proctor
window on the Voting Computer:
Display
Results
or [
Print &
]
Save Results
button (both of which are only enabled after a
vote); or the
Abort
button (enabled during and after a vote);
§
control system issues the
Display
signal; or
§
control system issues the
PrintSave
signal.
Used in conjunction with the other “state” signals,
StateStart, StateDisplay,
and
StatePrintSave
; and the pulsed signals,
NewVote
and
AgendaTrigger
. These
signals provide feedback to the control system about the voting sequence. They
can be used to highlight the sequence control buttons, or to enable/disable
touchpanel choices. (See “State Coordination,” page 61, for a “score sheet”
illustrating the sequence.)
See Also
End, Display, PrintSave, Abort
