background image

Crestron 

e-control Vote                                                                    SW-VOTE

4  

••

  How to Use This Manual

Installation & Reference Guide — DOC. 5822

Crestron
e-control Vote

How to Use This Manual

A Note on Printing This Document

Adobe and Acrobat are
trademarks of Adobe Systems
Incorporated.

This Portable Document File (PDF) can be printed with Adobe

 Acrobat

 Reader.

Printing from a Windows 95 platform, version 4.0 or later, is strongly recommended
because the figures print poorly with earlier versions. The latest version is freely
available from Adobe at http://www.adobe.com/acrobat/.

Quick Start

To see an “out-of-the-box” demonstration of Crestron e-control™ Vote as quickly as
possible, turn to one of the Quick Start Guides on the next page.

You will need:

 

A PC running Windows 95/98/NT

 

A Crestron CNMSX-PRO control system

 

A touchpanel (LC-3000, CT-3000, CT-3500, or VT-3500); and

 

A programming cable (CNSP-? or equivalent)

 

A null-modem cable with hardware handshaking (CNSP-532)

Follow the instructions in the guide precisely in the order given and you should be up
and running in a matter of minutes.

N

OTE

The demos included with this package are all compiled to two versions, a

 

COM

 

version for

use with an RS-232 serial connection, and a

 TCP 

version for use with an Ethernet connection (the

latter case requiring the CNX Gateway). The Quick Start Guides refer only to the

 COM

 

versions of

these programs because setting up a serial connection is far simpler. We strongly recommend getting
at least one demo to work first using a serial connection. Once that works, try the

 TCP 

versions.

Instructions for setting up TCP/IP communications are provided below (see “Communications
Setup, Control System Side, TCP/IP,” page 22).

A word on licensing

This is a licensed software product. A license “key,” obtainable from Crestron, is
required to run it. However, built into the licensing mechanism is a 15-day free trial.

Содержание e-control Vote








































































































































Отзывы: