Crestron
e-control Mail SW-MAIL
39
••
Server Configuration In Depth
Installation & Reference Guide — Doc. 5798
“Editing the Queries table” in the SW-DBM manual (Doc. 5823) for more
information.
The
Signal Analyzer
Window
While the server protocol is running, the
Server | Start w/Signal Analyzer
command from the
Server Monitor
window opens the
Signal Analyzer
window. (If
the server is already running, toggling
Server | Signal Analyzer
does the same
thing.)
The Signal Analyzer window, showing the all the active signal blocks defined in the demo configuration.
The DEMO3 signal block is selected. Therefore the DEMO3 signals are displayed in the lists to the left
and right. The
Timestamps
option is on; the
Debug Info
option off.
Signal Simulator
The top part of the window is for simulating receipt of incoming signals and
transmission of outgoing signals.
Signal Blocks & Connections
This list contains all active signal blocks as well as all active connections that have
signals defined (and hence can behave as signal blocks too).
To simulate an incoming or outgoing signal, you must first select an item from this
list.
