Crestron
e-control Mail SW-MAIL
78
••
Appendices
Installation & Reference Guide — Doc. 5798
EchoRcptName
Applies to
e-Mailer signal blocks
Description
String sent as feedback in response to setting a new recipient name
Direction
Server-to-system
Type
Serial
Value
New recipient name
Expected Reply
None
Comments
Definition of this signal is optional.
This signal is generated in response to lookups only. Signals that might precipitate
this are
LookupRcpt, LookupMsg, ClearNames, NewMail,
and manually picking
an item from a bound data scroller. Specifically excluded are
Shortcut
signals, and
the
SetRcpt
signal.
Default names are also echoed.
Serial data is limited to 83 characters. If the recipient name exceeds this length, the
transmitted string is truncated.
For efficiency, strings are only echoed when they change (e
.g.,
if two lookups both
produced the same result, the string would only be echoed the first time).
See Also
For more information on how default names are resolved, refer to “Implicit
Recipient Name & Address” on page 47.
