Crestron
e-control Mail SW-MAIL
76
••
Appendices
Installation & Reference Guide — Doc. 5798
EchoRcpt
Applies to
e-Mailbox signal blocks
Description
String sent as feedback in response to opening an e-mail message
Direction
Server-to-system
Type
Serial
Value
List of recipient names or addresses from the message’s recipient (“To:”) header
Expected Reply
None
Comments
Definition of this signal is optional.
This signal is generated in response to opening an e-mail message. The server
“opens” e-Mail messages by sending a
Pick
signal through the referenced IN box
scroller.
The whole recipient list is sent. Serial data transmission is limited to 83 characters.
If the recipient list exceeds this length, the transmitted string is truncated and an
ellipsis is substituted for the remaining characters. To make the most of the 83
characters, only the name or address of each recipient is put into the list; the name
is sent when available; otherwise the address is sent. Recipient name or address is
sent on a line by itself (
i.e.,
a carriage-return character is appended to each).
For efficiency, strings are only echoed when they change. Typically, the recipient
list would consist only of the signal block’s e-mail account name. If that is the case
for messages opened consecutively, the string would only be sent when the first
message is opened.
See Also
EchoDate, EchoFrom,
and
EchoSubj
signals
See SW-DBM documentation (Doc. 5823) for more information about the
Pick
signal.
