DigitalMedia™ Room Controller, CAT
Crestron
DM-RMC-100-1
Use the following procedure to install the DM-RMC-100-1:
1.
Attach supplied connector plugs to the appropriate cables. Refer to
“Hardware Hookup” which starts on page 21.
2.
Attach the included metal mounting plate (2019091) to the
mounting surface using four screws (not supplied).
3.
Attach the DM-RMC-100-1 to the mounting plate using the four
included #06-32 x 1/2" Phillips screws (2007238), as shown in the
illustration below.
Mounting DM-RMC-100-1 to a Flat Surface
Metal Mounting Plate
(2019091)
Screws (4) #06-32 x 1/2”
(2007238)
Mounting Suface
20
•
Room Controller, CAT: DM-RMC-100-1
Operations & Installation Guide – DOC. 6743-2G
