Crestron DigitalMedia DM-RMC-100-1, Руководство по эксплуатации и установке

Страница: 5 / 44

Crestron DM-RMC-100-1 DigitalMedia™ Room Controller, CAT
DigitalMedia™ Room Controller &
DM
®
CAT Receiver:
DM-RMC-100-1
Introduction
The DM-RMC-100-1 provides a convenient one-box interface solution to
support a single display device as part of a complete DigitalMedia™
system. It functions as a DM
®
CAT receiver and control interface,
providing a single HDMI
®
output along with a variety of control ports. Its
compact, low-profile design allows the DM-RMC-100-1 to be installed
discreetly behind a flat panel display or above a ceiling mounted
projector.
Features and Functions
•
DigitalMedia receiver and display controller
•
DM CAT input supports up to 450 foot (137 meter) cable length
1
•
Low-profile surface mount design
•
Provides one HDMI
®
or DVI display output
2
•
Handles HD video with Deep Color and 3D
•
Includes USB HID keyboard/mouse port
•
Enables device control via CEC, RS-232, IR, or Ethernet
(Continued on following page)
1. For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable. Up to two DM
Repeaters (model DM-DR, sold separately) may be required. Refer to the latest
version of the Creston DigitalMedia Design Guide (Doc. 4789) for complete
wiring guidelines. It is available from the Crestron Web site
(
www.crestron.com/dmresources ).
2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI
signal. CBL-HD-DVI interface cable available separately.
Operations & Installation Guide – DOC. 6743-2G Room Controller, CAT: DM-RMC-100-1
•
1