Crestron
DM-RMC-100-1
DigitalMedia™ Room Controller, CAT
Hardware Hookup
Make the necessary connections as called out in the illustration that
follows this paragraph. Refer to “Network Wiring” on page 18. Apply
power after all connections have been made.
When making connections to the DM-RMC-100-1, use Crestron power
supplies for Crestron equipment.
Hardware Connections for the DM-RMC-100-1 (Top View)
DM IN, 24 A B G:
From DMNet Port of DM Switcher, Transmitter
or Other DM Device or External Power Supply
DM IN, D & M:
From DM Switcher, Transmitter
or Other DM Device
LAN:
10BASE-T/100BASE-TX
Ethernet to LAN
Ground
Hardware Connections for the DM-RMC-100-1 (Bottom View)
SENS:
From Digital
Contact/Closure
USB:
For 3
rd
Party
Peripherals
HDMI:
Digital Video/
Audio Output
RELAY:
To Controllable
Devices
COM:
To Any RS-232
Device
IR:
To IR Device (e.g. Projector)
or Device Without RS-232
NOTE:
Ensure the unit is properly grounded by mounting it to a metal
electrical box or connecting a wire from the unit’s ground screw to
building/earth ground.
Operations & Installation Guide – DOC. 6743-2G
Room Controller, CAT: DM-RMC-100-1
•
21
