DigitalMedia™ Room Controller, CAT
Crestron
DM-RMC-100-1
3.
Use the Address Book in Crestron Toolbox to create an entry for
the DM-RMC-100-1 using the
TCP
connection type and enter the
IP address of the DM-RMC-100-1.
4.
Display the DM-RMC-100-1’s “System Info” window (click the
icon); communications are confirmed when the device
information is displayed.
USB Communication via DM Switcher
To establish USB communication between the PC and the
DM-RMC-100-1 via a DM switcher:
1.
Use the Address Book in Crestron Toolbox to create an entry using
the expected communication protocol (USB). When multiple USB
devices are connected, identify the DM switcher by entering
“DM-MD8X8”, “DM-MD16X16” or “DM-MD32X32” in the
Model
textbox, the unit’s serial number in the
Serial
textbox or the
unit’s hostname in the
Hostname
textbox. The hostname can be
found in the “System Info” window in the
Ethernet
section of the
window, however, communication must be established in order to
see this information in the “System Info” window.
2.
Display the DM-RMC-100-1’s “System Info” window (click the
icon); communications are confirmed when the device
information is displayed.
28
•
Room Controller, CAT: DM-RMC-100-1
Operations & Installation Guide – DOC. 6743-2G
