Creo Dolev 4press V, Руководство пользователя

Страница: 96 / 121

80 Chapter 4 – Calibration and Service Utilities
Service Utilities Mode Functions
Film
Film menu
First Load !
- Select this entry to move the center of the carriage to the
center of the film, and feed film from the loading cassette into the drum
(up to the film out detector).
Advance . .
- Select this entry to move the film forward (for example, to
create a gap between the margin of the exposure and the edge of the film).
Cut and Collect!
- Select this entry to cut the film, and perform a regular
film unloading cycle (after which the film unloading drawer opens).
Empty Drum !
- Select this entry to pull the film (that is in the drum) back
into the loading cassette, and open the film loading and film unloading
drawers.
Cut !
- Select this entry to cut the film.
Attach !
- Select this entry to fasten the film (already in the drum) to the
entire surface of the drum.
Note: The functions which are not explained are intended for service purposes
only.
First Load !
Advance ..
Cut and Collect !
Empty Drum !
Cut !
Attach !
Media Info ..
Motor Graph !
Note: If you are using an inline processor, select this entry to send the film to be
processed. The Advance window appears. Toggle the Film Length field to 100
mm, 200 mm, 300 mm, 400 mm, 500 mm, or 600 mm. If you are using an inline
processor, toggle this field to 300 mm, 400 mm, or 500 mm.