Creo Dolev 4press V, Руководство пользователя

Страница: 74 / 121

58 Chapter 2 – Handling Cassettes and Media
Toggle
- Press the soft button below
Toggle
to switch between the values
available for the toggle field in which the cursor is located (for example, the
Vendor
field in the Media Info window).
Scroll
- Press the soft button below
Scroll
to move the cursor to one (1)
menu entry (or window field) below the active one.
Done
- Press the soft button below
Done
to select the active entry when a
menu is displayed (and display the related menu/window), or to confirm
the current values when a window is displayed (and exit to the previous
window).
Util menu entries
Cut and Collect !
- Select this entry to cut the film, and perform a regular
film unloading cycle (after which the film unloading drawer opens).
Advance . .
- Select this entry to move the film forward (for example, to
create a gap between the margin of the exposure and the edge of the film).
Media Info . .
- Select this entry to update the parameters of the media after
loading a new roll of film. For details, see Updating the Media Info table
above.
Res. Int. Setting !
- Select this entry to calibrate the intensity for each
plotting resolution. (For details, see Chapter 4, Calibration and Service
Utilities on page 71).
Terminate an application !
- To turn off application in an orderly manner,
select this option, then press the
ON/OFF
button, above the panel.
Note: While a menu is displayed, this soft button is identical to Scroll .
Note: Since no button moves the cursor upward, the scrolling is cyclic (that is,
pressing the Scroll button when the last entry/field is active moves the cursor to
the first entry/field).
Note: If you are using an inline processor, select this entry to send the film to be
processed. The Advance window appears. Toggle the film length field to 100
mm, 200 mm, 300 mm, 400 mm, 500 mm, or 600 mm. If you are using an inline
processor, toggle this field to 300 mm, 400 mm, or 500 mm.