Creo Dolev 4press V, Руководство пользователя

Страница: 71 / 121

Exposing 55
When the exposure has been completed, the carriage returns to the HOME
position (the left side), the imagesetter punches the film (if a punch is
installed and active), and performs ADVANCE (according to the size of the
file). STANDBY appears on the LCD of the control panel.
At this stage, you may perform various functions (for example, Cut and
Collect).
Control Panel Functionality
Params
To view the parameters of the last/current exposure that the host
sent to the imagesetter:
1.
Press the soft button below
Params.
The Params screen appears.
*Dolev 4PressV - 36.000; Dolev 4pressV2- 60.000
Params screen
2.
To return to the previous screen, press the soft button below
Params
again.
3.
To activate
Status
or
Util
, press the related soft button.
For further details on the display of the control panel’s LCD screen, and on
system messages, see
Chapter 1, Introduction to the Imagesetter on page 13.
For details on Service Utilities mode, see Chapter 4, Calibration and Service
Utilities on page 71.
Flatleft 01
Total Height 50.00
Total Width 100.00
Width Pixels 00044000
Height lines 00018959
Height Offset 0.00
Width Offset 15.00
Laser Value 00
Res Int Table # 1
Spinner Speed *
Resolution 80.0
Simulation
00