Creo Dolev 4press V, Руководство пользователя

Страница: 77 / 121

Unloading Film 61
Film Cut & Rewind
- Use this option when Change Media mode is not
successful or film is stuck while retracted into the unloading cassette.
Ø
Open the load drawer, then select this option. The cutter cuts the film,
the film is pulled into the unload casette and the remainder of the film
is retracted back into the load cassette.
Unloading Film
When the unloading/accumulating cassette collects approx. 21 meters of
film, the control panel prompts:
C: [W] Acc. Cas full (# m)
.
When the unloading/accumulating cassette is full (it accumulated 23 m of
film), the film is cut, and the unloading drawer opens automatically.
Ø
To cut the film and open the drawer following the end of a specific
exposure, select
Cut & Collect
on the control panel, or via the Host.
Removing the Accumulating Cassette from its Drawer
To remove the cassette:
1.
Pull the film unloading drawer to open it to its full extent.
2.
Hold the unloading/accumulating cassette by the inset handle at its
top center.
3.
Lift the unloading/accumulating cassette out of its drawer.
Note: The # stands for the length of film that may be exposed before the
imagesetter performs CUT.
Note: Selecting Change Media or Open Unload Drawer on the control
panel, also opens the unloading drawer.