Creo Dolev 4press V, Руководство пользователя

Страница: 107 / 121

System Messages 91
[ E ]
No film at entry
This message indicates that the system did not detect film entry into
the drum at all.
1.
Make sure there is film in the loading cassette.
2.
Pull an additional two (2) inches of film out of the loading cassette,
and use the supplied Film trimmer to cut the edge of the film
properly.
[ F ]
First Load error
This message indicates that the film did not reach the film out detector.
1.
On the control panel, access Service Utilities mode, and select
Empty
Drum
. The film rolls back into the loading cassette (or into the film
loading drawer), and the film loading drawer opens.
2.
Pull approximately 32 inches of film out of the loading cassette until
you feel resistance, and use the supplied Film trimmer to cut the edge
of the film properly.
Note: In such cases, the Film Loading drawer usually opens automatically.