Creo Dolev 4press V, Руководство пользователя

Страница: 105 / 121

Film Guide Doors 89
Opening Film Guide Doors
During the procedures described below, you need to open the film guide
doors to check where media is stuck and/or to clear it.
Please see the Safety Precautions on page 1, for details on laser and other
safety precautions before proceeding.
Ø
Open the left and right service doors. (
For
instructions of how to open
service doors, see Opening Service Doors on page 18 ).
Film Guide Upper door
Ø
To open the upper door, release black screws (on both sides of
machine).
To close the upper door, replace the door to it’s upright position with
one hand and tighten back black screw to secure door (on both sides of
machine).
Film Guide Lower door
Ø
When required, lift the Lower door towards the front side of the
imagesetter. To close, lower the door back.
Note: Make sure the door is fastened firmly on both sides. The system does not
detect when the film guide upper door is open; therefore, make sure to close this
door before closing the left service door.
Note: The system does not detect when the film guide lower door is open;
therefore, make sure to close this door before closing the left service door.