Creo Dolev 4press V, Руководство пользователя

Страница: 75 / 121

Exposing 59
Other >
-
Select this entry to replace the media before it reaches its end and to
perform actions that are normally performed automatically, some of
which you need when clearing stuck media (see Chapter 5, Media Related
Troubleshooting on page 87).
Change Media !
- Select this entry to replace the media before it reaches its
end.
In case the unloading/accumulating cassette contains media, Cut and
Collect is performed automatically. The imagesetter then pulls the media
(that is in the drum) back into the loading cassette (empty drum), and
opens the film loading and film unloading drawers.
Ø
Pull the film beyond the edge of the cassette until you feel resistance,
and trim it (see Chapter 2, Handling Cassettes and Media, Trimming the
Film on page 47).
Open Load Drawer !
- Select this entry to manually open the film loading
drawer. The System Prompts:
Ø
Press the soft button below
Done
to open the drawer, or the one below
Cancel
to abort the request.
Open Unload Drawer !
- Select this entry to manually open the Film
Unloading drawer. The system prompts:
>
Change Media !
Open Load Drawer !
Open Unload Drawer !
Detectors Status !
Start Up !
Film Rewind !
Film Cut & Rewind
!
Drawer will be open. [Done/Cancel]
Note: When relevant (for example, during Expose), the system prompts:
Process is not available
.