V
I D E O
B
L A S T E R
D
I G I T A L
VCR U
S E R
’
S
G
U I D E
Setup Wizard Options: Video Input Selection
26
&DEOH%R[
- Cable TV service that terminates in a dedicated Cable TV box.
This option requires that you also select a channel to be used to receive TV
signals from your cable box. Pick the channel from the pop-up menu. (Usually
this is either channel 3 or channel 4.)
1
27(
0RVWFDEOHVDWHOOLWHER[HVWXQHWRFKDQQHOVRU,WLVSRVVLEOHWRXVH
RWKHUFKDQQHOQXPEHUV&KDQQHOQXPEHUVEHWZHHQDQGDUHPRVWFRPPRQDV
WKH\GLUHFWO\FRUUHVSRQ)FKDQQHOQXPEHUVRQDVWDQGDUG79VHW,I\RX
QHHGWRXVHDQXPEHUKLJKHUWKDQEHDZDUHWKDWXVLQJWKHVHQXPEHUVZLOOWXQHWR
FDEOHFKDQQHOVDQGDERYH)FKDQQHOVZLWKWKHVDPHQXPEHUV
'LJLWDO&DEOH%R[
- Cable TV service that terminates in a dedicated digital
Cable TV box. This option also requires that you select a channel to be used
to receive TV signals from your cable box. Select the channel from the pop-up
menu. (Usually channel 3 or channel 4.)
6DWHOOLWH%R[
- If you receive TV signals via a satellite service, choose this
option. You need to specify the channel that your satellite box uses to trans-
mit TV signals to your television. Select the channel from the pop-up menu.
(Usually channel 3 or channel 4.)
1RQH
- When using the Video input instead of the Tuner input, select “none”
from the pop-up list. The Video input preferences are selected on the next
page of the Wizard.
Video Input Selection
If you connected your device to the video input of the Digital VCR card instead of the RF Tuner
input, select a source type from the pop-up menu.
The video input jack on the Video Blaster Digital VCR card accepts multiple types of signals.
The exact format of the video signal (composite or S-Video) is selected on the next page of the
Wizard.
