Crary Air Reel 1010, Руководство пользователя, Страница: 9 / 72

PN 12069 R072208 5
SAFETY
Follow ALL operating, maintenance, and safety information
1.
in this manual.
Support the machine with blocks or safety stands when 2.
working around it.
Follow good shop practices: 3.
Keep service area clean •
and dry.
Be sure electrical outlets
•
and tools are properly
grounded.
Use adequate light for the
•
job at hand.
Use only tools, jacks and hoists of sufficient capacity for 4.
the job.
Place all controls in neutral or off, lower header to the ground, 5.
stop combine engine, set parking brake, chock wheels, re-
move ignition key and wait for all moving parts to stop before
servicing, adjusting, repairing or unplugging.
When maintenance work is completed, install and secure all 6.
guards before resuming work.
Relieve pressure from hydraulic circuit before servicing or 7.
disconnecting from combine.
Keep hands, feet, hair and clothing away from all moving
8.
and/or rotating parts.
Clear the area of bystanders, especially small children, 9.
when carrying out any maintenance and repairs or making
any adjustments.
Keep safety decals clean. Replace any decal that is dam
- 10.
aged or not clearly visible.
First-class maintenance is a prerequisite for the safest 11.
operation of your machine. Maintenance, including lubrica-
tions, should be performed with the machine stopped and
locked out.
Read and understand the Owner’s Manual and all safety 1.
decals before servicing, adjusting or repairing.
Install and secure all guards and shields before starting or 2.
operating.
Keep hands, feet, hair and clothing away from all moving
3.
and/or rotating parts.
Place all controls in neutral or off, lower header to the ground, 4.
stop combine engine, set parking brake, chock wheels, re-
move ignition key and wait for all moving parts to stop before
servicing, adjusting, repairing or unplugging.
Clear the area of bystanders, especially small children, 5.
before starting.
Keep all hydraulic lines, fittings, and couplers tight and free
6.
of leaks before and during use.
Clean reflectors and lights before transporting. 7.
Review safety related items annually with all personnel who 8.
will be operating or maintaining the machine.
Shut the combine off when connecting the machine hy- 9.
draulics.
Do not exceed fan speed of 5300 RPM. Check the fan speed 10.
by multiplying the drive shaft speed (RPM) by the gear ratio
of the gearbox.
Do not run the fan without back pressure. Close the butterfly 11.
valve on the fan if the flex hose is disconnected.
2.3 oPeRaTinG SaFeTY 2.4 mainTenance SaFeTY
Think SaFeTY! Work SaFelY!