Crary Air Reel 1010, Руководство пользователя, Страница: 38 / 72

PN 12069 R072208 34
ASSEMBLY
4.17 Reel SuPPoRT (manual FoRe & aFT)
Avoid crushing injury or death from fall of raised reel.
Before working on or under a raised reel, place all controls
in neutral or off, stop combine engine, set parking brake,
remove ignition key, wait for all moving parts to stop and set
cylinder stops on both sides of reel before servicing, adjusting,
repairing, or unplugging.
WaRninG
Figure 32, Reel support - manual (left hand)
Turn the threaded end of the OEM LH reel crank assembly
1.
into the nut of an adjustment tube (Figure 32).
Insert the long reel support pad into the LH reel support as
- 2.
sembly and slide onto the LH reel arm.
Bolt the adjustment tube to the LH reel support assembly
3.
with two 1/2” x 3” bolts and nuts.
Install a reel support yoke to existing holes in the LH reel arm
4.
with 1/4” x 2-3/4” bolts and serrated flange nuts.
Install a spacer on each side of front bottom hole on LH reel
5.
arm with a 1/2” x 4” bolt and locknut.
Repeat steps 1-4 to install the RH reel support (Figure 33).
6.
Ensure LH and RH reel supports are aligned.
Torque 1/2” hardware to 75 ft-lbs. 7.