CraftBot FLOW WIDE XL, Руководство пользователя

Страница: 31 / 58

SINGLE HEAD - USER MANUAL V1.2
31
The TO: email address is the E-mail address where
the printer will send the notification messages. SMTP
username: the GMAIL address you just registered SMTP
password: the password you used when you registered
the new GMAIL address.
After you have entered the settings, please click on “Send
test Email” to send a sample E-mail to the E-mail inbox
you have just set up.
Time zone
»
Select the Settings menu on the LCD screen
and touch the Time zone icon.
»
Select your time zone from the list and turn on
automatic time setting.
»
If you want to set the time yourself, then turn the off
automatic time setting and select the time from the
Date/Time lists.
Camera
You can enable the time-lapse function for a print job
that has already started. You can have a photo taken
every 1, 5 or 10 seconds. This parameter does not disable
the remote camera access.
Printing modes
This printer has only one head, so you cannot change the
printing mode.
FMS
You can change the FMS sensitivity of extruder.
»
Select the Other settings menu and turn on or off
the FMS E-mail system. If a filament jam is detected
while printing, the system will send a notification to
your configured E-mail address.
Sound
You can change the sounds of printer. You can separately
enable Event sounds and Button sounds.
»
Use the reset button to change back to the factory
values.
»
Inside the Event sounds menu you can choose from
20 ringtones for different printer statuses.