CraftBot FLOW WIDE XL, Руководство пользователя, Страница: 29 / 58

SINGLE HEAD - USER MANUAL V1.2
29
Troubleshooting:
If the FW update runs into an error, please do the
following:
1. Turn off the printer
2. If a USB cable is connected to the printer’s side,
disconnect it
3. Use a piece of filament to push and hold the reset
button (a small hole under the ethernet port. page 5.)
4. Turn on the printer and wait at least 5 seconds
5. Release the button
6. Install the firmware as above
Language
»
Select your language from the list
(EN, DE, HU, NL, FR, ES, IT)
Personalise
You can personalize your printer. There are several
options:
• Which side would you like the head to be positioned
on when paused?
• Would you like the machine to go to a specific XY
reference when the print is finished?
• Would you like the machine to go to a specific XY
reference when the print is terminated?
• Would you like the bed to move down when the print
is finished?
• Would you like the bed to move down when the print
is aborted?
• Would you like to extrude when the hotend is cold?
• Warning before homing or jogging to check the build
plate for any objects.
• Would you like the machine to check that the build
plate is present?
• Would you like the machine go to the pause position
if you open the door while printing?
• Would you like to switch to expert calibration mode?
• What should the machine do while reading the file
if it finds an unknown command or if the object
exceeds the workspace?
• The build plate needs time to reach a constant
temperature. You can set the waiting time before
printing and calibration.