CraftBot FLOW WIDE XL, Руководство пользователя

Страница: 36 / 58

SINGLE HEAD - USER MANUAL V1.2
36
Sounds
Turn event sounds on or off, adjust the volume or upload
a custom sound.
The following system sounds can be changed:
• Heating finished
• Beep in Gcode
• Pause in Gcode
• Print finished
• Calibration finished
• Message
• Warning
• Error
• Door open
• Filament clogged
Camera
Craftbot Flow printers are equipped with a built-in
camera. This allows the user to view the print progress,
spot failures and control the printer remotely.
»
To access the camera please log in to the web
interface and enter the Camera menu. You can take
snapshots or make a video of the print job.
You can access the camera stream directly at
http://<printer ip address>/camera.
The stream is only accessible with the camera username
and password. The camera has its own separate
username and password. This allows you to share
the camera with operators without revealing the user
interface credentials.
Nozzle
You can also specify the size of the nozzle here.
FMS
You can change the FMS sensitivity of the extruder.
Preset
Preheat values for individual materials can be set for the
head and the print tray.
System
• You can check the latest Firmware version
• You must have a craftbot.com account and a properly
set-up Web access key!
Login info
You can change your username and the associated
password.