CraftBot FLOW WIDE XL, Руководство пользователя

Страница: 16 / 58

SINGLE HEAD - USER MANUAL V1.2
16
5. THE GRAPHICAL USER INTERFACE
5.1.Home menu
»
Switch on the Craftbot printer with the ON / OFF
button located at the back of the appliance. (page 5)
◊ The LCD panel on the front will light up.
»
You can navigate the touch screen by touching icons.
»
On the main screen, you can preheat the head to a
preset temperature by pressing the print head (7) or
build-plate (8) icons.
The display shows the following information:
1. Firmware version number
2. The IP address (if the printer is connected to a
network, Wi-Fi or LAN)
3. The flash drive icon if there is a flash drive plugged in
4. LAN icon (when the printer is connected)
5. The Wi-Fi icon when the printer is connected to a
Wi-Fi network
6. Door open button
7. Head temperature
8. Bed temperature
The main menu items are on the left side:
• Print
• Heating
• Extrude
• Axes
• Info
• wSettings
You can switch on or off the heating by touching the
corresponding icons.
1. 2. 3.
6.
4.
7.
5.
8.