CraftBot FLOW WIDE XL, Руководство пользователя

Страница: 27 / 58

SINGLE HEAD - USER MANUAL V1.2
27
»
If the deviation is large, the markings are densely
spaced. The arrows below the markings indicate
which direction the knob should be turned to achieve
optimum adjustment.
»
To achieve the optimum value, the meter should be
between the two prominent lines.
◊ If the measurement is correct, the Next button
appears. By pressing the button the printer will
proceed to the next measurement point. Once all
three measurements have been completed, the
printer will re-check the distances.
»
If everything checks out, the measurement process
is complete.
Mesh bed leveling
»
This process creates a map of the build plate and
compensates for any surface inequalities while
printing the first few layers. For this calibration no
user intervention is required.
◊ During the process the printer measures the build
plate at 3 different temperatures: 60°C, 80°C, 100°C
(140 °F, 176 °F, 212 °F)
»
This process takes 15 minutes to complete.
FMS calibration
This calibration is measures the Filament Monitoring
System (FMS) sensor values, and adjusts them if
necessary.
For this calibration no user intervention is required.
• Please make sure that filament is loaded into the
head you want to calibrate before starting the
process.