Cradlepoint COR IBR350 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 148

Cradlepoint COR IBR350 Скачать руководство пользователя страница 72

Queues

Queues and rules work in conjunction to prioritize bandwidth for the most critical operations. Multiple rules can be associated with one queue. Use
rules to associate your more critical operations with queues that have higher bandwidth settings. For example, you might have two queues, one
for “critical” and one for “secondary” with critical having most of the bandwidth percentage. Use rules to associate your most important bandwidth
needs (POS system, VoIP, etc.) with the critical queue. Restrict the bandwidth available for less important functions with the secondary queue.

Assign percentages of both upload and download bandwidth to each queue. If you assign 80% download bandwidth to the ﬁrst queue, the next

queue will be forced to be 20% or less.

Figure 93: WAN QoS Queues

Click

Add

to create a new Traﬃc Shaping/QoS queue.

QueueName

: Choose a name that is meaningful to you.

Figure 94: WAN QoS Upload Bandwidth

UploadBandwidth EnableUploadQoS

: (Default: Enabled.) Deselect if you want your rule to apply to download traﬃc only. Leave this selected

to include upload restrictions with this queue.

BorrowSpareBandwidth

: (Default: Enabled.) When this is enabled, the interfaces/protocols associated with this rule will borrow unused band-

width from other rules. Disabling borrowing will restrict the traﬃc to the speciﬁed bandwidth. Higher priority queues will be oﬀered excess bandwidth

ﬁrst.

UploadBandwidth

: This is the percentage of the connected WAN upload bandwidth that will be reserved for the speciﬁed traﬃc. The maximum

value is adjusted to the remaining percentage after other rules receive their share.

UploadPriority

: The priority value has two diﬀerent eﬀects on traﬃc. Higher priority traﬃc is handled before lower priority traﬃc, which can lead

to shorter response times. Also, when spare bandwidth is available it is oﬀered to higher priority queues ﬁrst. Move the slider to select from the
following options (Default: Normal):

• Lowest
• Lower

72

«
...
70
71
72
73
74
...
»

Содержание COR IBR350





















































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды