CPI CLS Advance, Руководство оператора

Страница: 4 / 62

4
OM_CLS_-_EN_2-0
List of figures
CLS Advance
1 List of figures
Fig. 1: CLS front – Functional elements 8
Fig. 2: CLS rear – Functional elements 8
Fig. 3: Layer structure 9
Fig. 4: CLS with lid opened showing upper acceptance unit from the top 10
Fig. 5: CLS with upper acceptance unit opened showing upper acceptance unit from the bottom and
lower acceptance unit from the top 10
Fig. 6: CLS with lower acceptance unit opened showing payout unit 11
Fig. 7: Product label 12
Fig. 8: Detail: Interfaces, on-off switch and upper status illumination 13
Fig. 9: Detail: Upper and lower status Illumination 14
Fig. 10: Detail: Coin input funnel/dust tray and coin return tray 14
Fig. 11: Detail: Centrifuge, coin transport belt, coin validator and sorting spiral 15
Fig. 12: Detail: Coin hopper, Payout disc, return belt and tray, lower status illumination 15
Fig. 13: Euro configuration & capacity 16
Fig. 14: Detail: Coin return chute 16
Fig. 15: Detail: Rejector pin, coin return conveyor and tray 17
Fig. 16: Detail: Top key lock, push-button, pull handle 18
Fig. 17: Detail: Bottom lock and pull handle 18
Fig. 18: Coin input funnel providing three photoelectric sensors 19
Fig. 19: Centrifuge, coin validator providing several measurement sensors, coin rejector pin
and sorting spiral 20
Fig. 20: Sorting spiral providing sorting control sensors detecting coins falling into the hoppers 21
Fig. 21: Hopper providing coin ejector lever and payout control; coin return tray with full sensor 22
Fig. 23: Rear cutouts for fixing 23
Fig. 22: Bottom threaded inserts for fixing 23
Fig. 24: Detail: Interfaces, on-off switch and upper status illumination 24
Fig. 25: Switching CLS on/off 25
Fig. 26: Top key lock, push-button and pull handle 26
Fig. 27: Open lid 26
Fig. 28: Bayonet mount properly closed 27
Fig. 29: Coin validator arm lifted 27
Fig. 30: Disconnecting bayonet mount 28
Fig. 31: Bayonet mount disconnected 28
Fig. 32: Open acceptance unit 28
Fig. 33: Bottom key lock and pull handle 29
Fig. 34: Open payout unit 29
Fig. 35: Removing a hopper 30
Fig. 36: A hopper's 3 latching points 30
Fig. 37: Front hopper bail handles tilted correctly (towards the lid) 30
Fig. 38: Hopper filling via coin input funnel 32
Fig. 39: Direct hopper filling 32
Fig. 40: Raising coin return tray 33
Fig. 41: Bottom status illumination with coin return tray raised 33
Fig. 42: Loosening and removing funnel insert 35
Fig. 43: Reinserting funnel insert 35
Fig. 44: Surfaces to be cleaned, if necessary remove funnel insert 36
Fig. 45: Lifting the clip and folding down the dust tray for cleaning 37
Fig. 46: Unhinging the dust tray for cleaning 37
Fig. 47: In case of a coin jam: green coins into the hoppers, red coins to be taken out of the system 38
Fig. 48: Pulling coin(s) jammed (red) out of the payout slot 39
Fig. 49: Checking payout slot protective flap for easy movement 39
Fig. 50: Removing hopper bowl and payout disk 40
Fig. 51: Reinstalling hopper bowl 40
Fig. 52: Detail: Upper and lower status illumination 46