manualshive.com logo in svg

CPI CLS Advance, Руководство оператора

Поделиться
Скачать
CPI CLS Advance Скачать руководство пользователя страница 30

30

OM_CLS_-_EN_2-0

Operation

CLS 

Advance

7.5 

Removing and reinstalling a coin hopper

 

We recommend you empty the hoppers before removing them. Otherwise 
hopper coins tend to fall out of the hopper which could affect the hopper coin 

counters and even damage the CLS.

 

Due to the locks on the front of the CLS, the both front coin hoppers can only be 
removed after having removed the neighbor hoppers.

1 

Open payout unit 

(cf. Chap. "7.4 Opening and closing the coin payout unit", p. 29)

. 

2 

[

Fig. 35

/

1

] carefully pull out the hopper.

To reinsert the hopper:

3 

Mind the color code on the hopper and above the hopper position (red hopper fits in red position).

4 

Reinsert hopper into its dedicated position with its label pointing to the inside of the payout 
unit and press on both front hopper corners (pointing to the return belt) until the hopper 
engages in its three latching points

 

[

Fig. 36

/

2

].

 Attention! 

 

Let the hopper engage correctly to ensure proper contact to the PCB and proper 
operation.

5 

Close payout unit again 

(cf. Chap. "7.4 Opening and closing the coin payout unit", p. 29)

.

Fig. 37: 

Front hopper bail handles tilted correctly (towards the lid)

Fig. 36: 

A hopper's 3 latching points

Fig. 35: 

Removing a hopper

Payout Unit

Содержание CLS Advance































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды